(navigation image)
Home American Libraries | Canadian Libraries | Universal Library | Community Texts | Project Gutenberg | Children's Library | Biodiversity Heritage Library | Additional Collections
Search: Advanced Search
Anonymous User (login or join us)
Upload
See other formats

Full text of "MacBook Pro 15" Retina Display Mid 2012 Repair Manual"

Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



/ffXft 



Installing MacBook Pro 15" 

Retina Display Mid 2012 

Headphone Jack 

Written By: Jake Devincenzi 



S TOOLS: © PARTS: 

MacBook Pro and Air 5-Point Pentalobe MacBook Pro 15" Retina Headphone 

Screwdriver (1) Jack (1) 

Plastic Opening Tools (1) 

SpudgerM) 

T5 Torx Screwdriver (1) 



SUMMARY 

Headphone jack stop working? Use this guide to install a new one. 



© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 1 9 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 1 — Lower Case 




• Remove the following pentalobe 
screws securing the lower case to 
the MacBook Pro with Retina 
display. 

♦ Eight 3.0 mm 

# Two 2.3 mm 



Step 2 




• Lifting from the edge nearest the 
clutch cover, lift the lower case off 
the MacBook Pro. 

• Set the lower case aside. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 2 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 3 — Battery Connector 




• Peel back the warning label 
covering the battery connector. 



Step 4 




• Using the flat end of a spudger, gently pry the battery connector straight up out of its 
socket on the logic board. 

• Bend the battery cables back and out of the way, ensuring that the battery connector 
doesn't accidentally make contact with the logic board. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 3 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 5 — AirPort/Camera Cable 




• Use the tip of a spudger to pry the 
three AirPort antenna cables 
straight up off of their sockets on 
the AirPort board. 



Step 6 




• Use the tip of a spudger to push 
the camera cable connector out of 
its socket on the logic board. 

• Be sure to push parallel 
to the board, pushing first 
on one side, then the other to 
"walk" the connector out of its 
socket. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 4 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 7 




• Insert the flat end of a spudger underneath the rubber heat sink cover on the right fan. 

• Slide the spudger underneath the length of the cover, releasing the adhesive. 

• Lift the cover and flip it back so that you can access the cables underneath. 



Step 8 




• Use your fingers to pull the AirPort/Camera cables up off the fan. 

• The cables are adhered to the fan, so peel them up carefully to prevent ripping 
any. 

• Carefully de-route the cables from the plastic cable guide. 







©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 5 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 9 — I/O Board Cable 




• Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on 
the logic board. 

• In a similar fashion, remove the I/O Board connector from its socket on the I/O Board. 

• Remove the I/O Board cable from the MacBook Pro. 



Step 10 — Right Fan 




♦ Remove the single 2.9 mm T5 Torx 
screw securing the AirPort card to 
the logic board. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 6 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 11 




• Grasp the side of the AirPort card and pull parallel to the logic board, removing the AirPort 
card from the MacBook Pro. 



Step 12 




• Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF 
socket. 

• Be sure you are prying up on the hinged retaining flap, not the socket itself. 

• Gently pry up the right fan ribbon cable from the logic board. 



A 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 7 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 13 




• Remove the following three screws 
securing the right fan to the logic 
board: 

♦ One 4.4 mm T5 Torx screw 

One 3.9 mm T5 Wide Head Torx 
screw 

One 5.0 mm T5 Torx screw 



Step 14 




• Lift and remove the right fan out 
from the MacBook Pro. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 8 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 15 — Left Fan 




• Use the flat end of a spudger to lift 
the rubber heat sink cover up off 
the left fan. 



Step 16 




• Remove the following three screws 
securing the left fan to the logic 
board: 

♦ One 4.4 mm T5 Torx screw 

One 5.0 mm T5 Torx screw 

One 3.9 mm T5 Wide Head Torx 
screw 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 9 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 17 




• Use the tip of a spudger to flip up the retaining flap on the left fan ribbon cable ZIF socket 

• Be sure you are prying up on the hinged retaining flap, not the socket itself. 



A 



• Starting at the top of the cable, slide a plastic opening tool under the left fan cable to free it 
from the logic board. 

• Use caution when freeing the cable, as it is strongly adhered to the logic board. 



A 



• Lift the left fan out of the device. 



Step 18 — SSD 




♦ Remove the single 3.1 mmT5Torx 
screw securing the SSD to the 
logic board. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 10 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 19 




# Slightly lift the rightmost side of the SSD and firmly slide it straight away out of its socket 
on the logic board. 



Step 20 — I/O Board 




• Use the tip of a spudger to flip up the I/O board data cable lock and rotate it toward the 
battery side of the computer. 

• Use the flat end of a spudger to slide the I/O board data cable straight out of its socket on 
the logic board. 

• Do not lift up on the I/O board data cable, as its socket is very fragile. Pull the 
cable perpendicular to the face of the logic board. 



A 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 11 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 21 




♦ Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board. 

• Carefully lift the I/O board and remove it from the lower case. 



Step 22 — Logic Board Assembly 




• Use the flat end of a spudger to pry 
the headphone jack connector up 
from its socket on the logic board. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 12 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 23 




• Use the flat end of a spudger to pry the left speaker connector up and out of its socket on 
the logic board. 

• Use the tip of a spudger to pry the right speaker connector up and out of its socket on the 
logic board 

• Be sure to pry on the cable head, and not on the socket itself. Prying on the socket 
may cause it to separate from the logic board. 



A 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 13 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 24 




• Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF 
socket. 



• Be sure you are prying up on the hinged retaining flap, not the socket itself. 

• Use the flat end of a spudger to pull the keyboard ribbon cable out of its socket. 



A 



Step 25 




• Use the flat end of a spudger to pry 
the battery indicator connector up 
from its socket on the logic board. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 14 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 26 




• Use the flat end of a spudger to pry 
the keyboard backlight connector 
up from its socket on the logic 
board. 



Step 27 



^ 

^f> 








/ 




i| 


'Ath*- 


7 '^ 


39 ^^P| 


^^ 








,^H 







• Use the tip of a spudger or your 
fingernail to flip up the retaining flap 
on the microphone ribbon cable ZIF 
socket. 

• Be sure you are prying up 
on the hinged retaining flap, 
not the socket itself. 



A 



• Pull the microphone ribbon cable 
out of its socket. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 15 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 28 




• Use the tip of a spudger to pry the display data cable lock and rotate it toward the DC-ln 
side of the computer. 

• Pull the display data cable straight out of its socket on the logic board. 

• Do not lift up on the display data cable, as its socket is very fragile. Pull the cable 
parallel to the face of the logic board. 



A 



Step 29 




• Use the flat end of a spudger to 
carefully pry off the rubber screw 
cap on the raised screw head near 
to the MagSafe 2 connector. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 16 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 30 




• Remove the following six screws 
securing the logic board to to the 
upper case: 

♦ One 2.6 mm T5 Torx screw 

Two 5.8 mm T5 Torx screws 

One 3.8 mm T5 Torx screw 

One 5.2 mm Raised Head T5 
Torx screw 

♦ One 3.5 mm T5 Torx screw 



Step 31 




\ X^X 




• Lifting from the side nearest the battery, rotate the logic board toward the top of the 
MacBook Pro. 

• Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket 
on the bottom of the logic board. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 17 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



Step 32 




• Remove the logic board assembly 
from the MacBook Pro. 



Step 33 — Headphone Jack 




• Remove the two 3.6 mm T5 Torx screws securing the headphone jack to the upper case 
assembly. 

• Slide the headphone jack away from the upper case. 

• Lift and remove the headphone jack out from its recess in the upper case. 



To reassemble your device, follow these instructions in reverse order. 



This document was last generated on 2013-02-20 02:20:34 AM. 

©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 18 of 19 



Installing MacBook Pro 15" Retina Display Mid 2012 Headphone Jack 



©iFixit — CC BY-NC-SA www.iFixit.com Page 19 of 19